Ozone Generator Gas Source Types

The ozone gas generated by the ozone generator is divided into three kinds of gases (gas sources), which are air source, oxygen-enriched source, and liquid oxygen source. Enriched oxygen sources and liquid oxygen sources can also be oxygen sources.

The air source ozone generator system is to compress the air to a certain pressure (normal pressure 0.7-0.8Mpa) through an air compressor, and then go through a cold dryer, an adsorption dryer, a high-efficiency oil-water separator, and three-stage precision filtration to remove oil and water. After the dust removal treatment, it enters the gas storage tank, and finally enters the ozone discharge chamber through the adjustment of the intake pressure.

The oxygen-enriched source ozone generator system uses an air compressor to compress the air to a certain pressure (normal pressure 0.7-0.8Mpa), and passes through a cold dryer, an adsorption oxygen generator, a high-efficiency oil-water separator, an activated carbon filter, and three stages After filtration, oil, water and dust removal, it enters the gas storage tank, and finally enters the ozone discharge chamber through the adjustment of the intake pressure.

The liquid oxygen source ozone generator system is to vaporize the liquid oxygen in the liquid oxygen station through the gasifier into the gaseous oxygen required by the ozone generator, and then flow into the ozone discharge chamber after being stabilized by the voltage stabilizing device and stabilizing the flow.